Akrapovic Slip-on Manual de instrucciones de instalación - Página 5

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Campana de ventilación Akrapovic Slip-on. Akrapovic Slip-on 7 páginas. Exhaust system for the kawasaki z1000 2007; kawasaki z1000 2008; kawasaki z1000 2009
También para Akrapovic Slip-on: Manual de instrucciones de instalación (14 páginas)

Imprimir página

Figure 16

For SLIP-ON STREET LEGAL ONLY: Insert the catalytic converters into the link-pipes as shown (Figure 18, 19).

Figure 18

Position the mufflers correctly and slide them onto the outlet side of the link pipes (Figure 20). Correctly position the

carbon-fiber clamps and slide them onto the mufflers - bear in mind the left offset of the carbon-fiber clamp viewed from

the rear for right side and the right offset for the left side. WARNING: open the clamps slightly wider than the

diameter of the outer sleeves of the mufflers – do not scrape them along the mufflers outer sleeve! (Figure 21).

Hand tighten the carbon-fiber clamps onto the stock brackets. Position and attach the springs WARNING: make sure, that

springs pull the muffler all the way onto the link pipe – use rubber mallet if necessary to tap the connections into

place! (Figure 22). Tighten the stock bolts on the carbon-fiber clamps/stock muffler brackets joints (Figure 23). Make sure

the link pipe or muffler are not touching the frame and other parts. Tighten the stock metal clamps at link-pipes / stock

collector joints (Figure 24, 25).

Figure 20

NAV - 322

Figure 17

Figure 19

Figure 21