CANNICE Iblue 6 Instrucciones de uso

Navegue en línea o descargue pdf Instrucciones de uso para Auriculares CANNICE Iblue 6. CANNICE Iblue 6 2 páginas.
También para CANNICE Iblue 6: Manual de instrucciones (11 páginas)

Imprimir página
Multipoint
1.Press and hold the multifunction button for 6 seconds
to switch on the headset,it automatically enters pairing
mode,the red and blue indicator lights start flashes
alternately.
2.Activate the bluetooth feature on the first and the
second mobile phone,and set them to search for the
new bluetooth devices
3.Select 'Iblue6' from the list of found devices on both
mobile phones simultaneously and connect.
ON
Bluetooth
ON
Bluetooth
iblue6
iblue6
Connect
Connect
GET STARTED
To know more about the headset
Talktime: 4 hours
Music time: 4 hours
Standby time: 120 hours
Bluetooth version: 4.0
Bluetooth profiles: A2DP/HFP/HSP
Solution: CSR
Noise reduction: 2-MIC CVC noise reduction
Wireless range: 10m
Weight: 9.5g
Size: 66.5×14×21mm
CALLS
Operations
1.Answer a call:Quickly press the multifunction button to
answer the phone call,iblue6 will read the incoming
phone number.
2. End a call:Quickly press the multifunction button to
hang up the phone call during a call,with English voice
prompt "call terminate".
3.Reject a call:Press and hold the multifunction button to
reject a call.
4.Last number redial:Press the multifunction button
twice to redial last number when the headset is
connected to mobile phone and in standby status.
5.Switch music and calls:If you receive or make a call
while listening to music,the music is paused until the
call ends.
1.charger connect
2.multifunction
1
3
button
3.indicator lights
4
4.volume adjust
button
2
5.noise reduction
microphone
6.Microphone
5
6
KNOW MORE
Charging
The indicator light will be red while charging. Once fully
charged,the indicator light will be a steady blue,charge
time is 1.5 hour on an empty battery.
Clear settings
To clear the pairing settings from the headset,switch off
the headset and press and hold the the multifunction
and volume adjust button for 4 seconds,then connect
the headset to a charger.
Headset reset
To reset the headset. switch on the headset,press and
hold the multifunction button and connect the headset
to a charger,release the multifunction button after
connection with the charger for 2 seconds.
EASY TO USE
Basic operations
1. Adjust the volume:Press volume adjust button to adjust
the volume step by step,with beeps when in maximum
volume. press volume adjust button again,the volume will
be adjusted from Maximum to Minimum.
2. Multifunction button:for operations included switch
on/off,pairing,answer/end calls etc.
3. Indicator lights and voice prompts:when the headset start
pairing,the red and blue lights flash alternately,with voice
prompt 'on';red light flashes once when the headset is
switched off,with voice prompt 'off';blue light flashes in
every 5 seconds when in standby status; the blue light
flashes continuously when there is incoming calls,iblue6
will read the phone number;the blue light flashes in every
5 seconds when ending a call,with voice prompt 'call
terminate';the red indicator light keeps lighting when the
headset is charging;the red light is off and blue light is on
after fully charged.
Battery indicator:
The current battery status of headset will be displayed
in top right corner after the headset connected to IOS
devices.
Pairing
1.Press and hold the multifunction button about 5
seconds to switch on the headset,it automatically
enters the pairing mode, the red and blue indicator
lights flash alternately.
2.Activate the Bluetooth feature on your phone or
other devices,and set it to search for new Bluetooth
devices.
Bluetooth
ON
Search
Bluetooth headset
FCC ID:2AAIH-IB06
iblue 6
OPERATING INSTRUCTION
3.Select"iblue6"from the list of found devices on your
phone or other devices and connect,if necessary,enter
passcode 0000 to pair and connect the headset to your
device. Now you can use "iblue6" for phone calls or
listening to music.
Bluetooth
ON
iblue6
Connect