Clinton Electronics CE-PVM2MPF Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Cámara digital Clinton Electronics CE-PVM2MPF. Clinton Electronics CE-PVM2MPF 19 páginas.

IP CAMERA

Adjust the camera codec settings as needed to meet the requirements of the install network.

Click the APPLY button at the bottom of the page to save codec changes.

Codec:

• H264 : Video compression standard to transmit high quality video stream efficiently. H.264 is available in

various networks and systems and allows the bit-rate to be controlled according to adjusted bandwidth

usage.

• H265 : Provides substantially improved video quality at the same bit-rate of H.264. Check to ensure the

connected NVR or VMS Server supports H.265 video.

• MJPEG : Motion JPEG uses a considerable amount of bandwidth, but provides excellent quality for each

image.

Size : Adjust the output resolution of the camera as needed.

Frame Rate (FPS) : Set the frame rate for the video from 1~30 fps. If recording the video at a lower frame rate,

consider lowering the frame rate from the camera to save network bandwidth.

GOP Size (Group of Pictures) : The GOP setting is automatically adjusted for best results based on the FPS

setting and should only be adjusted if necessary (adjusting from the automatic setting can have a negative

effect with decoding hardware/software). Lowering the GOP value may improve video quality but consumes

more bandwidth. Conversely, increasing the GOP value consumes less bandwidth, which may degrade video

quality.

Bit-rate Control : You can select CBR, VBR, or VBR+.

• CBR (Constant Bit Rate) : Used for encoding H.264/H265 video into a fixed Bit Rate.

• VBR (Variable Bit Rate) : Encoding bit rate will be varied from video to video. Normally, when the video is

more dynamic, the Bit Rate will also go up.

Codec Settings