Clinton Electronics CE-CC110 Manual - Página 9
Navegue en línea o descargue pdf Manual para Cámara en color Clinton Electronics CE-CC110. Clinton Electronics CE-CC110 19 páginas.
Imprimir página■ Installation
When using a CS-Mount lens
Remove the lens protection cap and attach
the CS-Mount lens to the camera by screwing it in
clockwise.
When using a C-Mount lens
1. Remove the lens protection cap and
attach the C-mount adaptor.
2. Attach the C-Mount lens to the
camera by screwing it in clockwise.
Note
ㆍUse the specified lens connection parts as shown in the picture below.
Using of the wrong sized parts may cause damage
to the inside of the camera or result in poor fitting.
ㆍUsing oa lens which is too heavy affects the balance
of the camera and may cause a malfunction. Please
use a lens that weighs less than 450g.
ㆍSelect Av mode, if possible, when adjusting
the automatic light control (ALC) of an auto lens.
Use of PK mode may cause hunting.
14
High Resolution Color Camera
■ Connecting to a monitor
Connect the video output terminal located on the rear of the camera
to the monitor.
OSD EXTRA
IRIS JACK
VIDEO OUT
POWER
DC
SET
VIDEO
AC 24V IN
DC12V IN
ㆍThe connection method varies depending on the type of monitor and
accessories. Please refer to the monitor user manual.
ㆍTurn off the power when connecting.
■ Connecting to power
Check the standard power requirement before connecting to power.
Dual Power Type
(AC 24V/DC 12V, AC 24V Class2)
DC Power Type (DC 12V, 500mA)
OSD EXTRA
IRIS JACK
VIDEO OUT
POWER
POWER
DC
SET
AC 24V IN
VIDEO
AC 24V IN
DC12V IN
DC12V IN
OSD EXTRA
IRIS JACK
VIDEO OUT
POWER
POWER
DC
SET
AC 24V IN
VIDEO
AC 24V IN
DC12V IN
DC12V IN
15
High Resolution Color Camera