Clippasafe Extendable Swing Shut Gate 132 Guía de inicio rápido

Navegue en línea o descargue pdf Guía de inicio rápido para Mobiliario interior Clippasafe Extendable Swing Shut Gate 132. Clippasafe Extendable Swing Shut Gate 132 8 páginas.

Clippasafe Extendable Swing Shut Gate 132 Guía de inicio rápido
WIDTH
Adjustable from 73 to 96 cm
HEIGHT
Top of gate to floor 76.5 cm
Extendable
Swing Shut Gate
IMPORTANT - READ AND FOLLOW
THESE INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE
This safety barrier conforms to EN 1930:2011 when fitted according to these instructions between
two clean, structurally sound surfaces.
This safety barrier is designed for children up to 24 months.
This safety barrier is for domestic use only.
Manual closure system.
Suitable for fixing across door openings and at the top and bottom of stairways.
Make sure that you use the correct type of fixings depending on the surface available:
Self-adhesive pads for appropriate surfaces or wood screws for wooden surfaces, multiple usage
dowels and concrete screws for concrete surfaces, multiple usage dowels and cement screws for
cement surfaces and metal screws for metal surfaces.
If the gate has been exposed to an accident, it must not be used again.
Do not allow older children to climb over this gate as this may pose a danger.
Only use original Clippasafe spare parts for this product.
Periodically check the security of the fixings and general condition of each part. Adjust as necessary
referring to these instructions.
WARNING: Read these instructions before installation as incorrect installation can be dangerous.
WARNING: Incorrect fitting or positioning of this safety barrier can be dangerous.
WARNING: Do not use the safety barrier if any components are damaged or missing.
WARNING: The safety barrier must not be fitted across windows.
WARNING: Stop using the barrier if the child is capable of climbing over it.
7cm
GATE
EXTENSIONS
WALL CUPS x4
SPRING
x2
SPINDLES x 4
WASHER x 4
SELF-ADHESIVE
NUTS x 4
SPANNER x1
WALL CUP
PADS x4
Each 7cm extension
SPINDLE
comprises of a vertical bar
CASINGS x4
and a top and bottom fixing