Etaluma LS400 Manual de inicio - Página 2

Navegue en línea o descargue pdf Manual de inicio para Termostato Etaluma LS400. Etaluma LS400 12 páginas.

Imprimir página

This document is available for download at

Note that all steps are described for the LS500 but apply to the LS400 as well unless specifically stated.

I. Hardware: Setup of LS500 and LS400

A. Items included with LS500 (Lumascope 500)

USB power/communication cable

•

Brightfield Illuminator LS500/400

•

Fluorescence shroud

•

Hex wrench (2 mm)

•

External power supply/cord with country-specific plug LS500

•

B. Items included with LS400 (Lumascope 400)

USB power/communication cable

•

Brightfield Illuminator LS500/400

•

Hex wrench (2 mm)

•

C. Optional Accessories (purchased separately)

Phase Contrast Accessory LS500/400 (Motic)

•

Manual XY Stage for LS620, LS600, LS500, LS400

•

Labware Holders

•

o Holder for 35 mm Petri dishes

o Holder for 60 mm Petri dishes & Terasaki plates

o Holder for microscope slides & 50 mm Petri dishes

Brightfield Illuminator LS500/400 (to replace the earlier version White LED on flexible cable)

•

Objective Removal Tool for Meiji Plan Achromat and Plan Semi Apochromat Objectives

•

D. First step: Installing Lumaview 500/400 software on your computer

1. LS500 and LS400 are controlled by the Lumaview 500/400 software program. The latest Lumaview

version is downloadable from Etaluma's website and must be installed prior to connecting your

computer for the first time to the Lumascope (due to the need for a Driver that is installed at the same

time). For a listing of versions and the changes incorporated in each version, see Appendix A at the end

of this document.

2. Lumaview 500/400 will run on Windows XP, 7, 8, 8.1, and 10, but not Vista. Both desktop computers

and laptops can be used, but the best visualization correlates with resolution of the monitor (note that

the monitor does not affect image resolution unless you are using a low quality monitor that affects

focus). The computer should have Windows .NET Framework 2.0 or higher installed; see

https://msdn.microsoft.com/en-us/library/bb822049%28v=vs.110%29.aspx

E. Downloading and installing Lumaview 500/400

1. To download Lumaview 500/400, go to http://etaluma.com/products/downloads/. Click on the

Lumaview 500/400 - ZIP link to start the download and save the folder when prompted. Go to your

downloads location and click to open the Lumaview500Install_v(version#).zip file. In the opened folder,

you will see the following two files.

Etaluma, Inc. | 3129 Tiger Run Court, Suite 112 | Carlsbad, CA 92010 | 760-298-2355 | www.etaluma.com

http://etaluma.com/products/downloads.

Lumascope 500/400 Startup Guide

for more information.