DOEPFER A-100CGK Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Teclado electrónico DOEPFER A-100CGK. DOEPFER A-100CGK 12 páginas. Cv/gate-keyboard

Introduction

The A-100CGK is a monophonic keyboard with CV and Gate outputs. The main

application is the control of an A-100 system but even other modular systems or

synthesizers can be controlled provided that they use the 1V/octave standard. In

addition the A-100CGK has a Midi output.

The A-100CGK is a available as a ready built device with black metal case and a four

octave keyboard or as an OEM module. The OEM module contains only the

electronics kit and can be combined with any Fatar keybed with 2, 3, 4 or 5 octaves

(e.g. TP/6, TP/60, TP/7, TP/8S, TP/8O, TP/9). For these versions we do not offer a

suitable case. Rather the case has to be built by the customer. It's also possible to

install the OEM version with a suitable keybed (max. 4 octaves) into the top cover of

the A-100 Monster Base. Some of the available Fatar keybeds are listed on the

accessory page on our website www.doepfer.com > products > accessories. The

complete overview of all keybeds can be found on the Fatar website www.fatar.com.

All Fatar keybeds with up to 5 octaves can be combined with the A-100CGK OEM kit

(longer keybed are not possible).

These are the most important features of the A-100CGK (ready built version):

slightly weighted four octaves keybed TP/9 with velocity and monophonic after-

•

touch

black aluminium case with white printing

•

available in/outputs:

•

CV1: controlled by the currently pressed key, 1V/octave standard, 0...+5V

range (5 octaves)

CV2: controlled by the velocity, 0...+5V range

CV3: controlled by the after-touch sensor, ~ 0...+2.5V range

Gate: 0/+5V (can be changed internally to 0/+U or S-Trig, +U = voltage of the

used power supply, as for this modification the case has to be openden it

should be carried out by a specalized service center)

Midi In (so far not used)

Midi Out (only channel 1, with velocity, 0V CV1 corresponds to Midi note

number 36)

9V DC (for supply with an external wall outlet adapter, 7...12V are possible)

9 pin sub-D connector with CV1, CV2, CV3, Gate, Midi Out and supply voltage

(to establish a connection to the A-100 with one cable only and power the A-

100CGK from the A-100 frame, a suitable adapter module is in the planning

stage)