Cyenne Audio CY-3100 Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Media Converter Cyenne Audio CY-3100. Cyenne Audio CY-3100 18 páginas. High performance digital to analogue converter

Imprimir página

1. Digital Sound Inputs

BASIC USE

The CY-3100 can be used without any adjustment. Just switch on and choose the correct input.

Caution: avoid hearing damage!

Set the volume to -30dB before using headphones for the first time.

a. Push the power button. The display will light-up and shows information.

b. Adjust the volume down using the remote control or the funtion knob on the front.

c. Use the remote control to select the correct input. Like COAX-1 if that was used to connect the digital

player. If digital signal is being received, the display will show the sample rate. If the display stays on "No

signal", check If the correct input is used and check if the source (like CD player) is connected cor-

rectly and powered on.

d. Start the music and raise the volume a bit until you hear sound. If there is no sound, set the volume

back first before trying anything else. Note the CY-3100 cannot play Dolby nor DTS signals. The dis-

play will show "Incompatible" and there is no sound when such a signal is send.

e. Use the remote control to adjust the volume if needed.

When finished listening, press the "POWER" button on the remote control to switch the CY-3100 to

standby.

g. When the CY-3100 is not to be used for several days, switching off using the front power button.

Note: The CY-3100 starts with the last selected input and volume setting when power up.