DOF Reality P2 Manual de instrucciones de montaje - Página 15

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Accesorios para videojuegos DOF Reality P2. DOF Reality P2 18 páginas.

C) If your platform is moving fine in Tests, but not in the games you need to click Auto

Install button and for some games change in game settings following this guide

https://www.simracingstudio.com/download

If you did all that and your platform still don't move you need to Open a Ticket.

5.2 If one or more of your motors are stuck in an improper position and

doesn't seem to respond

It happens if motor somehow got into protection zone. It should not happen. It got locked in software.

To unlock it:

1) close all SRS applications

2) Download

http://dofreality.com/SMC3Utils.zip

3) unpack all archive contents into any local folder on your PC

4) Open with notepad file SMC3Utils.ini and set COMM_PORT= to proper COM port number

from your Windows Device Manager (see 5.1)

5) start/run SMC3Utils.exe. If you are getting error messages about COM port communication,

you haven't set port number properly in the previous step

6) select the problematic motor (left motor brown plug is Motor 1, right 2 black plug, rear Motor

3 white plug) most probably it is shown as OFF.

7) write down current Max Limits and Clip Input values (on the right of the SMC3Utils window)

and reduce them to 0

8) in SMC3Utils click small OFF button to the right of the motors selection, so it becomes ON.

9) power ON the platform

10) motor should move back to normal position, you can try 'Sine' for it to see that it moves fine

and measured motor position = green line goes along with desired motor position = blue line.

11) if all is good restore original Max Limits and Clip Input values (you need to increase Clip first

and then Max as max can't be bigger than Clip) and close SMC3Utils

Assembly Instructions DOF Reality H3 and P3