3M 7026 Instrucciones de uso - Página 3

Navegue en línea o descargue pdf Instrucciones de uso para Producto respiratorio 3M 7026. 3M 7026 16 páginas. Half facepiece respirator 6000 series

USE INSTRUCTIONS & LIMITATIONS

Important

Before use, the wearer must read and understand these User Instructions. Keep these User Instructions for

reference.

Use For

Respiratory protection from certain airborne contaminants according to NIOSH approvals, OSHA limitations,

in Canada CSA standard Z94.4 requirements, other applicable regulations and 3M instructions.

Do Not Use For

Concentrations of contaminants which are immediately dangerous to life or health, are unknown or when

concentration exceeds 10 times the permissible exposure limit (PEL) in air purifying mode, 50 times PEL in

supplied air mode or according to specific OSHA standards or applicable government regulations, whichever

is lower.

Use Instructions

1. Failure to follow all instructions and limitations on the use of this respirator and/or failure to wear this

respirator during all times of exposure can reduce respirator effectiveness and may result in sickness or

death.

2. Before occupational use of this respirator a written respiratory protection program must be implemented

meeting all the requirements of OSHA 29 CFR 1910.134 such as training, medical evaluation, and fit

testing and applicable OSHA substance specific standards. In Canada, CSA standard Z94.4 requirements

must be met. When used in supplied air mode, your employer must supply breathing air that meets at

least the requirements of Grade D breathing air in Compressed Gas Association Commodity

Specifications G-7.1-1997. In Canada, breathing air systems must be supplied with air which meets at

least the requirements of CSA Standard Z180.1.

3. The airborne contaminants which can be dangerous to your health include those that are so small you may

not be able to see or smell them.

4. Leave contaminated area immediately and contact supervisor if you smell or taste contaminants or if

dizziness, irritation, or other distress occurs.

5. Store respirator away from contaminated areas when not in use.

6. Dispose of used product in accordance with applicable regulations.

1. This respirator does not supply oxygen when used in air-purifying mode. Do not use in atmospheres

containing less than 19.5% oxygen.

2. Do not use when concentrations of contaminants are immediately dangerous to life or health, are

unknown or when concentrations exceed 10 times the permissible exposure limit (PEL) when used in air-

purifying mode, or according to specific OSHA standards or applicable government regulations,

whichever is lower. When used as a straight, Type C, continuous flow supplied air respirator, the

Assigned Protection Factor is 50 times the PEL or TLV guidelines for half facepiece respirators.

3. Do not alter, abuse or misuse this respirator.

4. Do not use with beards or other facial hair or other conditions that prevent a good seal between the face

and the faceseal of the respirator.