DOGA BTP Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Destornillador eléctrico DOGA BTP. DOGA BTP 16 páginas. Battery screwdrivers

6. LAMP INDICATIONS

Red Lit
Charger is plugged into the AC outlet. Ready to charge.
Yellow Flashing
(1) When the temperature of the battery is too low (<0
(2) When the temperature of the battery is too high (>40
(3) When the voltage of the battery is too low (below 14.4 voltage), it is in a trickle charge mode
Yellow Lit
The battery and the charger are not connected. If the yellow lit still on after trying re-attach the
battery, consul the an authorized dealer.
Green Flashing
Now start charging
Green Flashing
Battery is approximately 50% charged.
Green Flashing
Battery is approximately 80% charged.
Green Lit
Charging is complete. (Fully charged.)
Instructions manual / BTP
until the temperature of the battery goes up to over 0
the Yellow Flashing to Green Flashing automatically and start to charge. (If after 70
minutes, the lamp changes from yellow flashing to yellow lit, consult an authorized dealer.)
mode until the temperature of the battery drops to under 40
change from the Yellow Flashing to Green Flashing automatically and start to charge. (If
after 70 minutes, the lamp changes from yellow flashing to yellow lit, consult an authorized
dealer.)
until the voltage of the battery reaches to the standard value. The lamp will change from the
Yellow Flashing to Green Flashing automatically and start to charge. (If after 20 minutes,
the lamp changes from yellow flashing to yellow lit, consult an authorized dealer.)
o
o
C(<32
F)), it is in a trickle charge mode
o
o
C(<32
F). The lamp will change from
o
o
C(104
F)), it is in a trickle charge
o
o
C(104
F). The lamp will
10