DoggyRide eXtraLuxe Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Producto para el cuidado de mascotas DoggyRide eXtraLuxe. DoggyRide eXtraLuxe 6 páginas. Dog trailer/crate

Imprimir página

1. Assembly manual Doggyride, the Original

The trailer is already partially assembled inside the carton.

Take the DoggyRide out of the carton and unfold it. By opening the back side and top part you can put

the cross bar in the right position to keep the sides up. Connect the cross bar with a safety pin.

The wheels and tow bar are more easily assembled when the trailer is up-side down.

Remove the safety pin from the tow bar and turn it 180 degrees so that the tow bar points forward. Firm

the tow bar with the same safety pin.

Now you can connect the wheels. First take the axles from the small carton and put them through the

wheel opening so that the riding direction of the tire points forward. The riding direction is a V pointing

as a > sign. The axle is put into the wheel with waved washers around the hub and a regular washer in

the end. Fasten the bolt by hand, then put the axle into the axle holder and firm it with the safety pin.

Now firm the bolt using the tool inside the small carton.

Now you put the trailer back in normal position.

Now you can connect the trailer to the bicycle. Please make sure you connect the safety strap around

the frame part of the bicycle!

2. Connecting the Doggyride Original

Picture 1

The hitch

Hitch part for rear axle

Hitch part on tow bar

C. Safety pin

Picture 3

Take the trailer and put the tow bar hitch part (B) into

the hitch part on the axle (A) and connect the safety pin

(C).

Important: The connection to the bicycle is the most

important part of the assembly and use of the bicycle

trailer. Please do this carefully.

User manual Doggyride, the Original

Picture 2

Remove the bicycle part of the hitch (A) from the tow

bar. In case you have a quick release wheel, take the

pen complete out of the axle and put it through the hitch

part(A). In case you have the rear axle bolted, release

this bolt and connect it together with the hitch part (A).

This part stays permanently on your bicycle.

Picture 4

As soon as the trailer is connected to the bicycle wrap

the safety strap around the bicycle frame, so that in

case the trailer lets loose from the hitch it still is

connected to the bicycle.

English