clivus multrum CM8 Manual de instalación - Página 6
Navegue en línea o descargue pdf Manual de instalación para Productos de fontanería clivus multrum CM8. clivus multrum CM8 19 páginas. Waterless composting toilet systems
También para clivus multrum CM8: Manual de instalación (18 páginas), Manual de instalación (18 páginas), Manual de instalación (16 páginas), Manual de instalación (19 páginas)
Imprimir página
TOOLS REQUIRED
Screwdriver
(Philips/plain)
Scissors/Knife
Jigsaw
MATERIALS REQUIRED
• Water for wetting starter material.
• Additional 50mm PVC pipe (coupling and bends if absorption trench is to be located some
distance away from tank). Additional pipe bends if needed for vent pipe.
• In poor soil conditions, extra length of trenching arch or agi drain may be required.
• Drainage gravel for excess fluids drain.
INSTALLATION SUMMARY
1. Ensure the tank is in a position so that the toilet chute will be perfectly straight over the
tank below.
2. Ensure the tank foundation is solid with a sand or crusher dust bed.
3. Mark and cut holes in the floor for the toilet chute.
4. Mark and cut holes in the tank top.
5. Insert toilet chute and pedestal.
6. Install the vent system.
7. Install the liquid end-product drain pipe and absorption/transpiration trench.
8. Connect fan to power source.
9. Check everything is sealed.
10. Place a starter-bed of suitable bulking agent (e.g. wood shavings) in the unit.
11. Wet bulking agent before use of toilet.
12. Add starter bacteria after 14 days of use.
IMCM-8.130522
Spade
Drill
Tape Measure
www.ecoflo.com.au
1300-138-182
Spirit Level
PPE
Marker
Caulking gun
Ladder
6