Dogtra iQ NO BARK Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Producto para el cuidado de mascotas Dogtra iQ NO BARK. Dogtra iQ NO BARK 14 páginas. No bark collar
También para Dogtra iQ NO BARK: Manual (2 páginas)
Imprimir páginaOn/Off & Stimulation Dial
P
1~10
T
Note: When first using the iQ NO BARK,
it is recommended to start at the lowest
stimulation level. If your dog continues
to bark, gradually increase the stimulation
level. Closely monitor your dog's reaction to
find the right stimulation level for you dog.
LED INDICATOR
The LED indicator light will flash for 1 second
when the iQ NO BARK has been turned on and
then flash every 2 seconds. If the dog does not
bark for over 10 seconds, it will turn to sleep
mode to conserve battery life and the LED will
turn off. It will reactivate when your dog barks
and a vibration/correction needs to be made.
Function
Power Off
Pager Vibration
Stimulation Level
Test Mode
TESTING THE iQ NO BARK
1. Turn the dial on the iQ NO BARK to "T" to set
the system to test mode. The LED indicator
light will flash once and then flash every 3
seconds.
2. Activate the system by making sounds
directly into the mic. The unit should vibrate
twice. Repeat the same process to test again.
3. The iQ NO BARK has a preset delay of 15
seconds in between corrections. Once the
unit activates, it will not activate again until
15 seconds has gone by. The reason for the
delay is so that your dog figures out the
implications of the corrections from barking
before being corrected again.
* When on the test mode, the iQ NO BARK
emits a vibration without emitting stimulation
at the same time.
* When on the test mode, the sensor is more
sensitive and can be easily activated by a
small sound or tap.