Cylon American Auto-Matrix Aspect Matrix MAX Manual de instalación del hardware - Página 7

Navegue en línea o descargue pdf Manual de instalación del hardware para Controlador Cylon American Auto-Matrix Aspect Matrix MAX. Cylon American Auto-Matrix Aspect Matrix MAX 13 páginas.

Imprimir página

1.3.1

OWER

EQUIREMENTS

This product requires a transformer capable of providing 24VAC power to the product. Use of a UL listed

24VAC transformer is recommended.

To connect power, use the supplied two-position terminal plug. The output leads from the transformer

should be connected to the terminal plug. The terminal plug is then connected into the socket marked J1

on the PCB. American Auto-Matrix recommends using 18AWG cable for power wiring.

Figure 1-5 Connecting Power to Matrix MAX Area Controller

warranty.

1.3.1.1 LED I

NDICATION

The PCB of the product includes diagnostic LEDs, providing user feedback when power has been

connected to the device. When power is connected, all three of the LEDs should be illuminated. The

power diagnostic LEDs are located near port 1's terminal block switches.

Figure 1-6 Power LEDs on AspectFT-Matrix MAX Area Controller PCB

1-6

AspectFT-Matrix MAX Area Controller Installation Guide (1/05/2015)

24VAC

Output

WARNING

Do not share the power source for AspectFT-

Matrix MAX MAX Area Controller with other

devices. Damage to the product as a result of

improper power and wiring will void product

24V

3.3V