Cymbol G3 Series Manual rápido - Página 10
Navegue en línea o descargue pdf Manual rápido para Cámara de seguridad Cymbol G3 Series. Cymbol G3 Series 13 páginas. Network transmitter
También para Cymbol G3 Series: Manual rápido (13 páginas), Manual rápido (16 páginas), Manual rápido (12 páginas)
Imprimir página3.5 Network Camera Setup
This section describes how to configure the network camera, and is intended for product
Administrators, who have unrestricted access to all the Setup tools; and Operators, who have access
to the settings for Basic, Live View, Video & Image, Audio, Event, and System Configuration.
You can configure the network camera by clicking Setup in the top right-hand corner of the Live View
page. Click on this page to access the online help that explains the setup tools
3.6 Resetting to the factory default settings
To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance
web page (described in "3.5.6 System > Maintenance") or use the Reset Button on the network
camera, as described below:
•
Using the Reset Button
Follow the instructions below to reset the Network Camera to the factory default settings using
the Reset Button.
1.
Switch off the Network Camera by disconnecting the power adapter.
2.
Press and hold the Reset Button with a straightened paperclip while reconnecting the power.
Quick Installation Guide
When accessing the Network Camera for the first
time, the "Admin Password" dialog appears. Enter
your admin name and password, set by the
administrator.
Note: If the password is lost, the Network Camera
must be reset to the factory default settings. See "3.8
Resetting to the Factory Default Settings".
10