Cymbol G3 Series Manual rápido - Página 9

Navegue en línea o descargue pdf Manual rápido para Cámara de seguridad Cymbol G3 Series. Cymbol G3 Series 12 páginas. Network transmitter
También para Cymbol G3 Series: Manual rápido (13 páginas), Manual rápido (16 páginas), Manual rápido (13 páginas)

Imprimir página

You can configure the network transmitter by clicking Setup in the top right-hand corner of

the Live View page. Click on this page to access the online help that explains the setup

tools.

When accessing the Network Transmitter for the

first time, the "Admin Password" dialog appears.

Enter your admin name and password, set by the

administrator.

If the password is lost, the video encoder must

be reset to the factory default settings. See "3.8

Resetting to the Factory Default Settings" on

the User Guide.

3.6 Resetting to the factory default settings

To reset the Network Transmitter to the original factory settings, go to the Setup>System

>Maintenance web page (described in Maintenance, on page 55, the User Guide) or use

the control button on the network video transmitter, as described below:

Follow the instructions below to reset the Network Transmitter to the factory default

settings using the Reset Button.

1. Switch off the Network Transmitter by disconnecting the power adapter.

2. Press and hold the Control Button with a straightened paperclip while reconnecting the

power.

3. Keep the Control button pressed until the Power indicator blink.

4. Release the Control Button.

5. When the Power Indicator changes to Green (may take up to 1 minute), the process is

complete and the network video transmitter has been reset.

6. The transmitter resets to factory defaults and restarts after completing the factory reset.

Caution: When performing a Factory Reset, you will lose any settings you have saved.

3.7 More Information

For more information, please see the Network Transmitter User Guide, which is available on

the CD included in this package.