Doheny's 6575 Instrucciones - Página 2

Navegue en línea o descargue pdf Instrucciones para Equipos de iluminación Doheny's 6575. Doheny's 6575 3 páginas. In-ground solar reel

A Installing the Wheels:

1. Reinsert or adjust axle on T-Base. Ensure it is

visible from both ends.

2. Slide on the Wheel.

3. Slide on the small Washer.

4. Insert the Cotter Pin through the Axle. Cotter Pin

must be bent outward to lock in place.

5. Slide the Cap in place (see Figure 1)

6. Repeat process for second Wheel.

Figure 1

B Installing the Wheel Handle to the Base:

1. Insert the Elastic Straps into the grooves.

a. Groove for the straps will not align throughout

the Solar Reel (see Figure 2).

b. Each Elastic Strap should be evenly placed on

the Tubing to provide support for the Cover.

2. Slide the large Tube Adapter into the T-Base.

Figure 2

6950 51st Street Kenosha WI 53144 | Orders and Customer Care: 1-800-574-7665 | Fax: 1-800-323-5932 | Doheny.com

All manuals and user guides at all-guides.com

3. Insert the Dowel into the Tube Adapter

4. Slide the Wheel Handle onto the top of the Base.

5. Insert Screw M5X80 and screw it into the Wheel

C Installing the Tube Adapter to the Base:

1. On the opposite side of the Wheel Handle, insert

2. Slide the Dowel in place into the Tube Adapter.

3. Place the Washer into the Tube Adapter.

4. Insert Screw M5X40 into the Tube Adapter and

5. Screw M5 Open Nut into the bottom of M5X40 Screw.

6. Slide the Cap into place (may need rubber mallet).

Note: The pedal should be at a 90 degree angle

from vertical. This will lock the Tube Adapter in

place when turned downwards (see Figure 3).

Figure 3

a. The Wheel Handle needs to be inserted on the

side with the most axle exposed.

b. You will need to line up the screw hole in the

handle with the pre-drilled hole in the Tube

Adapter Axle (you should be able to see through

the handle and axle).

c. If you are having difficulty with Step 4b, you may

need to use a rubber mallet.

Handle, followed by the M5 Closed Nut.

the Tube Adapter to the top of the Base.

screw it into place.