Doheny's 7833 Instrucciones - Página 3

Navegue en línea o descargue pdf Instrucciones para Equipos de iluminación Doheny's 7833. Doheny's 7833 3 páginas. In-ground solar reel

D Attaching the Cover:

1. When positioning the Cover, you should have the

Solar Reel near the edge of the pool for rectangular

pools. For irregular pools, place the Solar Reel at a

midway point near the end of the pool.

2. Using a pair of scissors or screwdriver, carefully

punch a hole in the Cover.

3. Fold the Elastic Strap into the casing (see Figure 5)

and slide into the Cover.

Figure 5

4. Once through the Cover, unfold the Elastic Strap

so it is securely locked in place (see Figure 6).

Figure 6

5. If installing the Solar Reel in an offset position, then

fold the Cover where the Elastic Straps attach,

allowing for the Elastic Straps to go through both

sides of the Cover.

10411 80th Avenue Pleasant Prairie, WI 53158 | Orders and Customer Care: 1-800-574-7665 | Fax: 1-800-323-5932 | Doheny.com

E Attaching the Fixation (Steel Bracket):

1. Adjust the length of Tubes to fit the width of your pool.

2. Slide the Fixation (steel bracket) into the groove

and slide into place.

Note: When sliding in place, line up the indentation

with the screw line.

3. Insert the 3/4 in. Screw into the small groove of

the Tubing next to the bracket and drill into place.

The Fixation Screw will not drill in, it will compress

Tube, locking it into place (see Figure 7).

Figure 7

4. Repeat the steps above to install the second

Fixation on the other side of the reel.