Cynergy3 IWTxT-000 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Transmisor Cynergy3 IWTxT-000. Cynergy3 IWTxT-000 11 páginas. Wireless transmitter with tx supply adds wireless functionality to any 4-20 ma transmitter
Imprimir página| IWTxT SERIES
WIRELESS 4-20mA TRANSMITTER OPERATING MANUAL
5.
SETTING UP THE IWTxT WIRELESS TRANSMITTER
The IWTxT instrument is shipped in a default configuration which allows the unit to
connect with any default IWR receiver unit and transmit the measured 4-20 mA signal
every 1 minute simply by switching the unit on using S2 on the internal circuit board.
If a different update rate is required, or a different network frequency channel is required
these parameters can be selected using the 12-way DIP Switch as detailed below:
Dip Switches 1, 2, & 3 on the 12 -way Dip Switch selects the RF Network the IWTxT will
transmit on. The default network for both the IWTxT transmitter and IWR receiver is
network 1.
Switches 4, 5, & 6 select the Transmission rate of the unit. This effectively sets how often
the 4-20 mA value is sent to the receiver. Note that selecting a transmission rate of below
1 minute substantially reduces the battery life.
At 1 and 5 second rate, a power save option is available (on by default) that changes the
transmit time to every 30 seconds if the IWR is switched off or out of range for more than
3 minutes. This option can be changed using the IWT-SET program.
Sensata Technologies, Inc. ("Sensata") data sheets are solely intended to assist designers ("Buyers") who are developing systems that
incorporate Sensata products (also referred to herein as "components"). Buyer understands and agrees that Buyer remains responsible for
using its independent analysis, evaluation and judgment in designing Buyer's systems and products. Sensata data sheets have been created
using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described
in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes
to its data sheets or components without notice.
Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO
OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND
NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS
ARE PROVIDED "AS IS". SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE
DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY
OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET
POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD
TO SENSATA DATA SHEETS OR USE THEREOF.
All products are sold subject to Sensata's terms and conditions of sale supplied at
FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS' PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY
RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS,
AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR
SUPPORT THAT MAY BE PROVIDED BY SENSATA.
Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA.
opyright © 2021 Sensata Technologies, Inc.
C
USB
WIRELESS
DIP SWITCH
BATTERY
1 2 3 4
RF NETWORK
1 2 3
1
0 0 0
2
0 0 1
3
0 1 0
4
0 1 1
5
1 0 0
6
1 0 1
7
1 1 0
8
1 1 1
Transmit time
10 seconds
www.sensata.com
SENSATA ASSUMES NO LIABILITY
Page 5
7 8
+
4-20mA Tx Supply
ON/OFF
LED1
Switch SW2
4 5 6
0 0 0
CONTACT US
EUROPE
+44 (0)1202 897969
Cynergy3 Components Ltd.
7 Cobham Road,
Ferndown Industrial Estate,
Wimborne, Dorset,
BH21 7PE, United Kingdom
USA
+1 310 561 8092 / +1 866 258 5057