ASG DTT-L 200 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Equipos de prueba ASG DTT-L 200. ASG DTT-L 200 15 páginas. Digital torque testers

Imprimir página
Main Menu (Continued)

Auto-Shutdown

•
To set Auto-Shutdown, press the MENU/ESC key, the display will show the main
menu page. Use the UP and DOWN ARROW keys to move the cursor point to
SETTING. Press the ENTER key and use the UP and DOWN ARROW keys to
move the cursor point to AUTO-SHUTDOWN. Press the ENTER key. The display
will show the Auto-Shutdown menu page.
•
The Auto-Shutdown feature can be enabled to conserve battery power where the
meter powers down after 5, 10, and 15 minutes (depending on auto-shutdown
time) since the last key press. Use the UP and DOWN ARROW keys to move the
cursor to the auto-shutdown time preferred and press ENTER.
•
Press ESC key to return to the main menu page. If you activate this feature,
the OFF symbol will be displayed on the main display.

Auto-Reset

The Auto-Reset feature is used to automatically reset the reading value in peak mode.
This mode works when the reading value is higher than the setting value, causing the
peak value to change to a new held value. The user does not need to press the RESET
key, since the peak value will automatically reset. This feature works in peak mode
only. If this feature is activated, the icon "AR" will display on main display.
•
To set Auto-Reset, press the MENU/ESC key, the display will show the main
menu page. Use the UP and DOWN ARROW keys to move the cursor point to
SETTING. Press the ENTER key and use the UP and DOWN ARROW keys to
move the cursor point to AUTO-RESET. Press the ENTER key. The display will
show the Auto-Reset menu page.
•
Press the ESC key to return the main menu page
•
Use the UP and DOWN ARROW keys to change the value. Use the RIGHT ARROW
key to change the unit. Press ZERO key to reset value to zero. Press ENTER key to
set new value and return to setting menu. Press ESC to return to setting menu.
•
Auto-Reset feature will automatically be disabled if you set AUTO-RESET = 0
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
DTT-L Series Digital Torque Testers
User Manual
| Phone: (
44110-3898
888) 486-6163
| Fax: (
| Email: [email protected] | www.asg-jergens.com
216) 481-4519
Page 11 of 15