ASG X-PAQ ASG-NW2500-EIP Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Unidad de control ASG X-PAQ ASG-NW2500-EIP. ASG X-PAQ ASG-NW2500-EIP 15 páginas. Ethernet ip network communication module
Imprimir página
Programming Menu:
Programming the Unit's Subnet Mask:
The Ethernet IP network card has quite a bit of flexibility and there-
fore also has a large number of variables that can be programmed by
an end user.
The menu system has been broken down into several logical sub-
menus.
The network sub-menu contains IP addresses, gateway and subnet
mask configurations.
The data input and data output menus allow user to select which
data bytes to send/receive and also where those bytes will be located
in the input and output strings.
The data mask sub-menu allows users to choose different popular
data masks that include different input and output data.
The password can be edited from this menu and the connection
status can also be monito
The Subnet Mask is used to identify which part of the IP ad-
dress is the network ID and which part is the host ID. This is
accomplished by a logical bitwise ANDing of the IP address and
the netmask. In order to edit the netmask, select Subnet Mask
from the main menu and press enter.
The current mask value will be displayed at this point. In order
to change the mask's value use the LEFT and RIGHT arrow
keys to select any given digit in the address and then use the
UP and DOWN keys to alter that digit's value. Pressing the en-
ter key will allow the user to save the new subnet mask that is
displayed on the LCD. The escape key can be pressed any time
during the editing process allowing the user to return to the
main menu without saving a new value. For a new Subnet
Mask to take effect, the unit's power must be cycled off and
then back on.
red
9