Cynwark PGF Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Ventilador Cynwark PGF. Cynwark PGF 5 páginas. Cynwark personal golf fan owners manual

Imprimir página

Charging The Battery

Charge the battery in a cool, dry place. Charging should be done with the fan off. The battery does not

have to be fully discharged before recharging. The battery will not develop a memory.

Approximate charge time is under 3 hrs. if battery is completely discharged. The battery can be stored

fully charged. Unlike other battery types, it will maintain charge almost indefinitely.

1. Plug the charger into an AC wall outlet. The LED on the front of the charger will illuminate green.

2. Plug the charger output into the charging receptacle on the fan.

3. The LED on the charger will switch to red indicating that the battery is charging.

4. Once the battery is fully charged the LED on the charger will turn green.

5. Unplug the charger from the fan and the wall socket. The safety circuits in the charger and the

battery will discontinue the charge once the battery is fully charged. It is not recommended to

rely solely on the safety circuits.

6. Unplug the charger when not in use.

NOTE: Lithium-Ion batteries, while in use, will continue to provide full power with very little power

fade unlike typical batteries. When the battery is fully discharged, the battery safety circuits will immediately

cut power to the fan motor. The battery circuits will not allow the fan to run until the battery has been

recharged.

NOTE: The fan may start running when the charger is plugged in. This can occur if the battery was cut

off by the discharge safety circuits and the power switch is left in a run position. Push the power button

until the fan stops and then continue charging the battery.

NOTE: For optimum performance, the battery should have one charge/discharge cycle every three

months.

NOTE: The PGF should only be charged on a non-flammable surface. Your PGF is provided with an

engineered charger and only this charger should be used. If you should lose the PGF charger additional

chargers are available for sale on our Web Site.

Charging Indicator Light

Red

when charging

Green

when fully charged

Care & Cleaning

Make sure the fan is turned off before cleaning. Clean parts with a duster or damp cloth.

Use care around the motor housing to prevent liquid from coming in contact with motor.

Prior to resuming use, make sure the PGF is dry and all moisture has been eliminated. Do

not immerse the PGF in any type of liquid or use abrasive cleaning solutions. When storing

the PGF in the off season, make sure it is in a dry environment.

Specifications *

Motor

Motor Speed

Approximate Charge Time

(Battery fully discharged)

Approximate Run Time

(Battery fully charged)

Battery

Battery Charger Input

Battery Charger Maximum Output

Overall Height

Overall Weight

All specifications are based on the latest product information available at the time of

printing. We reserve the right to make changes at any time without notice.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

www.PGFfan.com

www.golfcartfan.com

Brushless; ball bearing; 12V DC

5000 RPM under load

Under 3 hours

3¾ hours on high speed, 6½ hours on low speed

11.1 V; 4.4 amp hour; lithium-ion (NMC)

100–240V; 50/60 Hz; 0.4A

12.6V DC; 2A

19 inches

2 lbs.

888-938-6672