CYP CH-517RXHS Manual de instrucciones - Página 13
Navegue en línea o descargue pdf Manual de instrucciones para Media Converter CYP CH-517RXHS. CYP CH-517RXHS 20 páginas. Hdmi video scaler over cat5e/6/7 with lan/ir/rs232/bidirectional
poe receiver
También para CYP CH-517RXHS: Manual de instrucciones (20 páginas)
Imprimir página
COMMAND
S SATURATION 0~60
R SATURATION
S SHARPNESS 0~30
R SHARPNESS
S NR 0~3
R NR
S AUDIO DELAY 0~3
R AUDIO DELAY
S AUDIO MUTE 0/1
R AUDIO MUTE
S KEY LOCK 0/1
R KEY LOCK
FW
S RESET 1
Note:
1.
RS-232 commands will not execute unless followed with carriage
return and LF (Line Feed).
2. Commands are not case-sensitive.
3.
Resolutions 1~16 are RGB encoded and 17~25 are YUV encoded.
4.
Digital audio supports LPCM 2CH only, please ensure the source
input audio is set to send LPCM 2CH audio in order to avoid
unwanted audio noise.
DESCRIPTION
Sets the numerical value for the SATURATION
setting (0~60)
Reports the numerical value for the SATURATION
setting (0~60)
Sets the numerical value for the SHARPNESS
setting (0~30)
Reports the numerical value for the SHARPNESS
setting (0~30)
0=OFF
1=LOW
Reports the numerical equivalent for the NOISE
REDUCTION setting (as listed above)
0=OFF
1=40ms
Reports the numeric equivalent for AUDIO
DELAY setting (as listed above)
0=ON
Reports the numeric equivalent for AUDIO MUTE
setting (as listed above)
0=ENABLE
Reports the numeric equivalent for KEY LOCK
setting (as listed above)
Checks the FIRMWARE version
Sets the numerical equivalent for the RESET
setting (as left)
2=MIDDLE
3=HIGH
2=110ms
3=150ms
1=MUTE
1=DISABLE
8