Asgard Access Manual

Navegue en línea o descargue pdf Manual para Mobiliario interior Asgard Access. Asgard Access 4 páginas.

ACCESS

BASE INSTRUCTIONS

Flat and firm base. Recommended: concrete, tarmac or paving flags.

Min. distance from walls/ shrubbery: 1000mm.

Min. base size (WxDxH) 2200mm x 1150mm x 50mm.

LEVELING THE UNIT

Correctly level the constructed unit using the shims (ZCOMPPLAS)

provided prior to fixing the unit to the ground. Slide the packing pieces

under the corners of the unit base as required until an equal gap has

been achieved around the door allowing for its smooth operation and

alignment.

Warning: some panels may weigh over

20Kg. Beware of manual handling

It is always recommended to anchor the unit in to the ground. Drill

through the four holes in the base of the unit using 6mm dia masonry drill

to a depth of 70mm. Screw in the anchor fixings. (These have a self

cutting thread). If not anchoring the unit, fit the self seal plugs

BEFORE BUILDING to block the fixing holes, 4 from underneath and

4 from side of the base.

TOOLS REQUIRED

Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a

8mm, 10mm & 13mm socket or spanner.

For maintenance instructions of this product visit www.asgardsss.co.uk

2x 70mm disc padlocks

required. Not supplied.

Keys alike recommended.