akrometrix Table Top Shadow Moire Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Equipos de laboratorio akrometrix Table Top Shadow Moire. akrometrix Table Top Shadow Moire 14 páginas.
Imprimir páginaTable Top Shadow Moiré User Manual
A.5 Maintenance
A.5.1 Stage Lubrication
A syringe of lubricant called Lubriplate (see Figure A.3) is supplied with each
Akrometrix system. This lubricant should be applied to the stage leadscrews at 6 month
intervals. The procedure to do so is as follows.
1. Remove the grating carefully from the machine.
2. Remove the mirror from the grating support.
3. Unscrew the grating support and remove it, exposing the motor stage.
4. Using the Surface Measurement application, lower the stage to its bottom position.
The leadscrews will be visible as shown in Figure A.4.
5. Apply a small bead of Lubriplate along the visible portion of the stage leadscrew.
A small flathead screwdriver or wooden coffee stirrer can be used, just take care
to not damage the leadscrew.
6. Raise the stage to its top position.
7. Apply another small bead of Lubriplate along the visible portion of the leadscrew.
8. Jog the stages up and down to their limits several times to ensure that the lubricant
is adequately spread onto the leadscrew.
Figure A.3 Lubriplate Stage Lubricant
Warning: Avoid contact with skin and do not inhale.
This product has a NFPA Health rating of 1. In the
event of skin contact, wash with warm water and soap.
A full MSDS is available upon request.
40-5000-8100 Rev. A
Page 13 of 14