Ash Technologies quicklook zoom Manual del usuario - Página 16
Navegue en línea o descargue pdf Manual del usuario para Lupas Ash Technologies quicklook zoom. Ash Technologies quicklook zoom 20 páginas.
Imprimir páginaNote about Auto-off and persistence
By default the Auto-off
is enabled,
i.e. the
unit will turn
itself off after
5 minutes
of
non-use.
If you disable this function,
you
could run the risk that a stationary
image
may persist on the display if a unit is left for
a considerable
time
looking
at the same
image.
This persistence will clear eventually
but placi ng the unit on a clea n wh ite sheet
of paper and leaving the unit switched
on
can help in severe cases.
Reset
If
Quicklook
stops
responding
to
button
presses it may need to be reset.
Using a
pen or similar
instrument,
press the reset
button
recessed into the underside
of the
unit near the camera.
Fitting the wrist strap
Quicklook Zoom is supplied with an optional
wrist strap.
To fit this, pass the thin loop of
the stra p th roug h the hoop on the top of the
unit.
Pass the entire strap through the thin
loop and pu II tig ht.
16