Dokki CMT-6 Manual de consulta rápida - Página 2

Navegue en línea o descargue pdf Manual de consulta rápida para Estación de acoplamiento Dokki CMT-6. Dokki CMT-6 4 páginas.

Quick Reference Guide CMT-6 (v2)

POSITIONING

The CMT-6 v2 has rubber feet on the bottom and can be used as a desk-stand. Please make sure the CMT-6 v2 is positioned on a firm

background which is levelled.

POWER AND CONNECTION

After unpacking and positioning, simply connect the power adapter to the back of the CMT-6 v2 and the other end in the wall outlet.

USAGE SAMPLES

CHARGE ONLY

•

You can use the CMT-6 v2 as a 'charge only dock'.

Simply plugin the power adapter that is supplied with the CMT-6 v2. All ports are now ready to charge.

COMMUNICATION AND CHARGING (MIXED)

•

It is also possible to use all ports to communicate with the PC as well. For this connect the USB port situated at the back to a

PC. Also the USB driver installation is necessary (see below).

Intended use is for the OPN2001 in VCP COM mode. Other modes (USB HID) and models using the 'OPN2001 simulation'

application may run unstable and result in data loss.

Remember: each scanner connection to the PC will generate it's own VCP (Virtual Comm Port), so make sure your PC and

software are able to handle this!

Not all PC system setups are able to cope with the high number of Virtual Communication Ports. This is not

caused by the dock, but is due to limitations of the PC's USB port chipset manufacturer in combination with the

Operating System.

Read our website's FAQ for additional information.

DRIVER INSTALLATION – ONLY NECESSARY WHEN USING COMMUNICATION

The docking station itself does not need a separate driver. The only driver that needs to be installed on your PC is the

appropriate driver for your scanner OPN-model that you wish to use.

If not already done so, please follow the instructions for driver installation in the corresponding manual that belongs to your

scanner model as provided by Opticon.

DOKKi

CMT-6 v2_QRG-002

.eu