CYP nT15GX01 Manual de instrucciones - Página 14

Navegue en línea o descargue pdf Manual de instrucciones para Matriz de conmutación CYP nT15GX01. CYP nT15GX01 20 páginas. 8×8 dvi matrix with audio

Once in the command line interface (CLI) type "telnet", then the IP

address of the unit you wish to and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP congurations. To reset the IP,

type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of

commands, see Section 6.7).

Note: Any commands will not be executed unless followed by a

carriage return. Commands are not case-sensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.