CYP CMIR-44 Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Interruptor CYP CMIR-44. CYP CMIR-44 12 páginas. 4 by 4 infrared matrix
Imprimir página7. Hardware Description
The following sections describe the hardware components of the unit.
7.1 Front Panel
1
2
IR sensor: To control the system itself.
q
POWER Button & LED: Press to turn the unit on or again to put it into
②
standby. When the system is on the LED will be green, press again to enter
STANDBY mode, the LED will then be red.
IR IN 1 & output LED: Press the button to select which output IR signal will
e
be sent, the LED will then change according to the selection.
IR IN 2 & output LED: Press the button to select which output IR signal will
r
be sent, the LED will then change according to the selection.
IR IN 3 & output LED: Press the button to select which output IR signal will
t
be sent, the LED will then change according to the selection.
IR IN 4 & output LED: Press the button to select which output IR signal will
y
be sent, the LED will then change according to the selection. 3
3
4
3
5
6