CYP CSO-T2 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Interruptor CYP CSO-T2. CYP CSO-T2 20 páginas. Instant hqv hd scaler box
También para CYP CSO-T2: Manual de instrucciones (9 páginas)

Imprimir página

HDMI output: This slot are where you connect the HDMI output port to

⑥

the displays with HDMI cable.

Power: Plug the 5V DC power supply into this unit and connect the

⑦

adaptor to AC wall outlet.

5. Remote Control

Menu: Press this button to bring up the

①

OSD main menu page.

Power: Press the button once to turn

②

the system on, press a second time to

enter standby mode.

Cleaner: Press to switch the Noise

③

Reduction (NR) feature. There are four

adjustable levels Off/Low/Middle/High

and these features wor when the

input resolution is 480i / 480p / 576i /

576p / 1080i.

Detail: Press to switch the Detail

④

Enhancement feature. There are five

levels that we can adjust 0 / 25 / 50 /

75 / 100. The factory default value is 0

(OFF).

Up/Down/Left/Right: Press the Up/

⑤

Down buttons to move the highlight

bar to your desired setting when using the OSD. Press the Left/Right

buttons to increase/decrease the setting values.

Enter: Press the button to confirm the selection.

⑥

Demo: Press to see the split window demo. This demo will display

⑦

half left and half right side in order to compare the video quality. On

the left side is the original video signal without the HQV process and

on the right side is the video after going through the HQV process. This

demo will work when input resolution i480i/480p/576i/576p/1080i.

Aspect Ratio: Press to select the Aspect Ratio format, there are

⑧

Standard/ Full Screen/ Crop/ Anamorphic/ Flexview/ 1_1/

Cinemascope and these features work when resolution is under

480i/480p/576i/576p. When input resolution is 720p/1080i/1080p, the

standard/1:1/Cinemascope can be adjusted, but other features are

non-adjustable. The factory default is standard.

Input selection: Press each input selection button to choose the input

⑨

source.

Output: Press this button to select the desired output resolution (Auto

⑩

mode/720p/1080p).

POWER

CLEANER

DETAIL

ENTER

DEMO

A.RATIO

HDMI 2

OUTPUT

HDMI 1

COMP

VIDEO

INPUT

Instant

HQV

CR-60