CYP CH-1527TXPLV Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Transmisor CYP CH-1527TXPLV. CYP CH-1527TXPLV 20 páginas. 4k uhd+ hdmi over hdbaset transmitter (pse) & receiver (pd)
Imprimir página6.2 Transmitter's Rear Panel
DC 48V: Plug the 48V DC power adapter into this port and connect
1
it to an AC wall outlet for power.
2
IR1 BLASTER: Connect to the provided IR Blaster to transmit IR
signals to devices within direct line-of-sight of the IR Blaster.
IR2 EXTENDER: Connect to the provided IR Extender to extend
3
the IR control range of remotely located devices. Ensure that the
remote being used is within direct line-of-sight of the IR Extender.
4
CAT5e/6/7 OUT: Connect to a compatible HDBaseT Receiver with
a single Cat.5e/6/7 cable for transmission of all data signals.
HDMI IN: Connect to HDMI source equipment such as a media
5
player, game console or set-top box.
6.3 Receiver's Front Panel
1
ISP: This button is reserved for factory use only.
STD/UPDATE: This switch is reserved for factory use only. The default
2
setting is "STD".
3
RS-232 OUT: Connect to a serial controllable device for the
extension of RS-232 signals.
SYNC LED: This LED will illuminate when a live input source is
4
detected.
HQ/STD LED: This LED will illuminate whenever the AVLC function
is active. A green LED indicates that AVLC is in HQ (High Quality)
mode. A red LED indicates that AVLC is in STD (Standard) mode.
IR1
IR2
DC 48V
BLASTER
EXTENDER
1
2
3
UPDATE
STD
1
2
3
CAT5e/6/7 OUT
HDMI IN
4
5
HQ/STD
4
4