1010music Blackbox Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Equipos de grabación 1010music Blackbox. 1010music Blackbox 6 páginas.
También para 1010music Blackbox: Manual de inicio rápido (4 páginas)
Imprimir página
cord to a standard wall adapter and plug it into a household power outlet. To work on the go, you can plug it into a USB
battery, like you might use to recharge your phone. To hear the output, connect headphones to the PHONES jack or
connect one or more audio outputs to your mixer. The PHONES jack will play all of the outputs combined.
Controls Overview
Blackbox has a fairly simple set of input controls. You choose which screen you are using by pushing the white
navigation buttons. You control playback and recording of clips, sequences and songs using the black transport buttons.
You select and trigger sound elements and configure parameters using the touch screen and the knobs. The small round
INFO button allows you to drill into an item on the screen to edit more details. Push it repeatedly to access detailed
information about the item. The small round BACK button takes you back to the main screen for the current functional
area.
Pads
You can explore the available functionality of blackbox by trying out the preloaded
presets. Push PSET, and then use the knobs to select a preset. Touch Load to open the
selected preset. We will use the preset 000 SL BLASS MUSIC DEMO as our example in this
guide. When you first load the preset, you will see the bank of Pads that have been
assigned to this preset on the PADS screen. Touch a pad to select the pad and trigger the
wav file. You can also select a pad by turning a knob. Push INFO a few times to cycle
through the available configuration settings for this pad. Touch PADS or the BACK button
to get back to the PADS screen. A blue progress bar along the bottom of a pad shows
you its playback state. Some pads, such as SY C LFO in this preset, use the LaunchMode
of GATE, and will play as long as you are touching the pad. Other pads, such as PC O BLIP, use the LaunchMode of
Trigger, so tapping the pad will play the entire WAV file. The Toggle LaunchMode will play the WAV file from the time
you first tap the pad until you tap it again to turn it off.
Keys
The KEYS screen has a keyboard that you can use to play the currently selected pad and
pitch shift it based on the note selected. Select a pad to use on the PADS screen (e.g. SY
CHOR), push the KEYS button and then play a tune by touching the notes on the virtual
keyboard. By default, the base wave file is played on C4. However, some WAV files define
a different note as the base note. Use the arrows to slide the keyboard an octave or a key
left or right. The icon in the top left shows which pad is currently selected.
Sequences
On the SEQS screen you can record and play back musical sequences. Push SEQS and you
will see a grid of sequences. The currently active sequences have white frames around
them. Before we push PLAY to hear the sequences, let's make sure we are not in Song
mode. Push SONG to display the SONG screen. Note the Song button at the top of the
touch screen. If it is blue, touch the on screen Song button to deactivate Song mode.
3/18/19 6:19 PM
Copyright 1010music LLC 2019
Figure 2: P ADS Screen
Figure 3: K EYS Screen
Figure 4: S EQS S creen
P. 2 of 6