Dolby Laboratories CP650 Hoja de especificaciones - Página 2

Navegue en línea o descargue pdf Hoja de especificaciones para Reproductor de DVD Dolby Laboratories CP650. Dolby Laboratories CP650 2 páginas. Digital cinema processor
También para Dolby Laboratories CP650: Hoja de especificaciones (4 páginas), Manual del usuario (3 páginas)

Imprimir página

CP650

Digital Cinema Processor

Front Panel

Setup Control Panel Access Door

Mic input level control

Bypass output level control

Test points

RS-232C port (9-pin female D-connector)

for PC connection

9-pin female D-connector, balanced, for a

microphone or microphone multiplexer;

phantom power available

Main Display

Shows current format signal level and processor

condition

Displays setup and calibration information

for use with menu buttons

Menu Buttons

Steps through menu pages

Selects parameters within a page (use main

fader knob for parameter choices)

Store settings

Mute Button

Mutes all audio outputs

Fader Display

Shows fader setting, projector in use, bypass

power supply condition

Format Buttons

Preprogrammed and user defined audio

format control

Bypass Button

Selects main or bypass power supply

in the CP650, this acts as a power switch

Rear Panel

Automation Connector

25-pin female D-connector for controlling and

indicating format, fader select, projector

status, and mute

Remote Unit/Fader Input

Terminal strip connector for

Dolby Cat. No. 779 remote control unit,

Dolby Cat. No. 771 remote fader,

external auditorium faders (100

potentiometer)

Hearing Impaired Output

RCA-type female phono connector

Center-weighted sum of L, C, R

Output level: 200 mV fixed

Digital Reader Inputs*

25-pin female D-connectors for two

Dolby Digital readers

Dolby Laboratories, Inc.

100 Potrero Avenue, San Francisco, CA 94103-4813 USA

Wootton Bassett, Wiltshire SN4 8QJ England

dolby.com

Dolby, Pro Logic, and the double-D symbol are registered trademarks of Dolby Laboratories. Surround EX is a trademark of Dolby Laboratories.

Main Audio Output

25-pin male D-connector, balanced or floating

Maximum level, balanced loads:

+26 dBu (15.5 V)

Maximum level, unbalanced loads:

+20 dBu (7.75 V)

Dolby level output adjust range:

–31 to –12 dBu (20–780 mV)

Option Card I/O

25-pin female D-connector for digital

bitstream input and surrounds output when

equipped with the Cat. No. 790 option card

L, C, R mid and high crossover outputs with

Cat. No. 791 option card

Nonsync Inputs

RCA-type female phono connectors for two

stereo nonsync sources

Input impedance: 21

Sensitivity: 0.2–4 V (NS 1), 0.06–1.5 V (NS 2)

Six-Channel Audio Input

25-pin female D-connector for external

six-channel analogue source

Input impedance: 10

(C, Ls, Rs, SW)

Operating level: 300 mV

RS-232C Serial Data Input Port

9-pin female D-connector to connect external

PC for setup and automation control

Ethernet Connector

RJ-45 female for automation control and

subtitling timing data

Motor Start

9-pin female D-connector for Dolby Digital

reader motor start timing and projector

changeover

Microphone Input

XLR female connector, balanced, for

Auditorium Assist, PA, or B-chain alignment mic

(or multiplexer)

Phantom power available (+15 V)

kΩ

linear

1-415-558-0200

44-1793-842100

kΩ

(L, R), 27

kΩ

1-415-863-1373

44-1793-842101

Optical Inputs

9-pin female D-connectors, balanced, for two

stereo solar cells or analogue LED readers

Power available for external cell preamp

circuits (±14 V/40 mA)

Loudspeaker Equalization

L, C, R, Ls, Rs, Bsl, Bsr: digital 27-band,

1/3-octave

Le, Re (with optional Cat. No. 791):

digital 27-band, 1/3-octave

SW: Digital parametric

Distortion

Typically 0.005% in Dolby SR mode (output

–10 dBu, input 10 dB over Dolby level)

Dynamic Range

Typically 105 dB with fader set to 7

Power Requirements

100–120 and 200–240 VAC, 50–60 Hz,

100 W maximum (including built-in bypass power

supply where applicable)

Dimensions and Weight

3-U rackmount chassis; faceplate:

133 x 483 mm (5.25 x 19 inches)

Maximum projection behind equipment rack rail:

365 mm (14.4 inches)

Maximum projection in front of mounting plate:

38 mm (1.5 inches)

Net: 10.4 kg (23 lb)

Environmental Conditions

Operating: 0°C–40°C (32°F–104°F),

forced-air cooling, 20%–80% relative

humidity (noncondensing)

Regulatory Notices

North America: This unit complies with the limits

for a Class A digital device, pursuant to Part 15

of the FCC rules, and Industry Canada ICES-003

specifications. It is UL Listed for the US and

Canada.

Europe: This unit complies with the

requirements of Low Voltage Directive 3/23/EEC

and EMC Directive 89/336/EEC and carries the

CE marking accordingly.

Visit www.dolby.com/warranty for the latest

product warrenty information.