Akron 9301 Instrucciones de uso - Página 4

Navegue en línea o descargue pdf Instrucciones de uso para Instrumentos de medida Akron 9301. Akron 9301 5 páginas. Portable flow meter
También para Akron 9301: Instrucciones de uso (3 páginas)

Imprimir página

Once powered up a quick AKRON logo will appear, followed by a screen showing what device(s) have been connected.

Figure #1 shows Pressure Sensor and Flow Sensor connected.

To access the ROOT (MAIN) MENU, hold down both buttons for approximately 15 seconds to access the ROOT MENU.

Note: While holding both buttons TOTAL VOLUME will appear. This should be ignored during setup.

However, once flowing, holding both buttons for approximately 2 seconds will provide the total flow since the last start up.

The ROOT (MAIN) MENU contains 5 Sub Menus:

Units Menu

Flow Menu

Pressure Menu

Display Menu

Valve Menu

To navigate through all menus the left button (seLect) will highlight an individual line.

Once highlighted, the right button (enter) will open the selected menu.

units Menu

This Menu is used to select GPM or LPM, Gallons or Liters and PSI or kPa.

Example: With FLOW highlighted, press ENTER to choose between GPM and LPM. Once the correct selection is made, press NEXT to move to the next

menu item.

When finished, press NEXT to move to the BACK selection. Press ENTER to return to the ROOT (MAIN) MENU.

FLOW Menu

The FLOW MENU provides the ability to set the pipe size and add a "zero cutoff" for the flow.

SELECT the pipe size for the location of the Flow Sensor (normally 2.5").

eXpLanatiOn OF inDiViDuaL Menu screens

Units Menu

Flow Menu

Root Menu