Ashdown TourBus 15 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Equipo de música Ashdown TourBus 15. Ashdown TourBus 15 7 páginas.

Imprimir página

BASIC PRECAUTIONS

WARNING

When using electrical products,

basic precautions should be followed,

including the following:

1. Read all the instructions before using the

product.

2. Do not use this product near water – for

example, near a bathtub, washbowl,

kitchen sink, in a wet basement or near a

swimming pool.

3. This product may cause permanent

hearing loss. Do not operate for long

periods of time at a high volume level or at

any level that is uncomfortable. If you

experience any hearing loss or ringing in

the ears, you should consult an audiologist.

4. Make sure nothing interferes with the

ventilation of the product when in use.

5. The product should be located away from

heat sources such as radiators, heat registers,

or other products that produce heat.

6. The product should be connected to a

power supply of the type described in the

operating instructions or as marked on

the product.

7. The power supply cord of the product

should be unplugged from the outlet

when left unused for a long period of

time.

8. Care should be taken so that objects do

not fall and liquids are not spilled into the

enclosure through openings.

9. The product should be serviced by

qualified personnel when:

a. The power supply cord or the plug has

been damaged; or

b. Objects have fallen, or liquid has been

spilled into the

product: or

c. The product has been exposed to rain

or moisture: or

d. The product does not appear to

operate normally or exhibits marked

change in performance: or

e. The product has been dropped, or the

enclosure damaged.

10.Do not attempt to service the product. All

servicing should be referred to qualified

service personnel.

11.For continued protection against the risk

of fire, replace fuses only with those of the

same type and rating as indicated on the

back of the product.

Important Safety Instructions

FUSE REPLACEMENT

We recommend that you use an authorized

repair person to change the fuse in this unit.

To access the fuse, rst power down the unit

To access the fuse, first power down the unit

and unplug the cable from the wall outlet.

and unplug the cable from the wall outlet

Using a small screw driver, turn the cap on

and the amplifier. Using a small screw driver,

the fuse holder counter-clockwise to remove

open the fuse tray by prying open the small

the old fuse. Then replace with a comparable

tab as shown in the drawing above. Please

new fuse and close the cap.

note that the tray will not come all of the

way out. Remove the old fuse and replace

with a comparable new fuse and close the

tray being sure that the tray snaps into

position

WARNINGS USED ON THE EQUIPMENT

The lightning flash with the

arrow head symbol within an

equilateral triangle is intended to

alert the user to the presence of

uninsulated 'dangerous voltage' within this

product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing) instructions in the

literature accompanying this product.

GROUNDING INSTRUCTIONS

This product must be grounded (earthed). If it

should malfunction or break down, grounding

provides a path of least resistance for electric

current to reduce the risk of electric shock.

This product is equipped with a supply cord

having an equipment grounding conductor

and a grounding plug. The plug must be

plugged into an appropriate outlet that is

properly installed and grounded in

accordance with the local codes and

ordinances.

DANGER - Improper connection of the

equipment grounding conductor can result

in a risk of electric shock. Check with a

qualified electrician or serviceman if you are

in doubt as to whether the product is

properly grounded. Do not modify the plug

provided with the product – if it will not fit

the outlet, have a suitable outlet fitted.

The wires in this mains cord are coloured in

accordance with the following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

CE MARK FOR EUROPEAN

HARMONISED STANDARDS

The CE mark which is attached to these

products means it conforms to EMC

Directive (89/69/EEC), CE mark Directive

(93/68/EEC) and Low Voltage Directive

(72/23/EEC).