CYP CH-514TXL Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Extensor CYP CH-514TXL. CYP CH-514TXL 16 páginas. Hdbaset lite hdmi over single cat5e/6/7 extender
También para CYP CH-514TXL: Manual de instrucciones (14 páginas)
Imprimir página
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
IR1 OUT
1
1
IR1 OUT: Connect to the supplied IR blaster for IR signal transmission to
the source equipment. Place the IR blaster in direct line-of-sight of
the equipment to be controlled.
HDMI IN: Connect to an HDMI source device such as a DVD player or
2
Set-top Box with HDMI cable or DVI to HDMI cable.
3
IR2 IN: Connect to the supplied IR extender cable for IR signal
reception and transmission to IR2 OUT on the receiver unit. Ensure
that remote being used is within the direct line-of-sight of the IR
extender.
DC 5V: Connect the 5V DC power supply to the unit and plug the
4
adaptor into an AC outlet.
CAT5e/6 OUT: Connect to the receiver unit with a single CAT5e/6/7
5
cable for transmission of all data signals. The yellow LED will
illuminate when both transmitter and receiver are connected
together and are powered. The green LED will illuminate when the
device is connected to the power supply.
3
HDMI IN
IR2 IN
2
3
DC 5V
CAT5e/6 OUT
4
5