CYP PU-HBTPL-ZE Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Extensor CYP PU-HBTPL-ZE. CYP PU-HBTPL-ZE 12 páginas. Hdbaset lite zone extender 1 x hdmi / 1 x hdbaset out

Imprimir página

1. INTRODUCTION

The PU-HBTPL-ZE HDBaseT Lite Zone extender is designed to allow

AV integrators to easily create additional zones for any HDBaseT

distribution system whilst enabling the HDBaseT pass-through signal

to be extended further over CAT5e/6/7 (up to 60m). This device

supports the transmission of video (resolutions up to 1080p Full HD,

plus 4K Ultra High Definition, and 1920x1200@60Hz), multi-channel

digital audio and control via IR, RS-232 or Web GUI/Telnet IP over a

single CAT5e/6/7 cable. The Zone extender allows signals to be

transmitted up to 60m from the transmitter device to the Zone

extender where the signal can be routed to a local display via the

HDMI output. The signal is also transmitted simultaneously via the

HDBaseT output enabling it to be distributed up to 60m over

CAT5e/6/7 from the zone. The PU-HBTPL-ZE Zone extender utilises

PoC (Power over Cable) to provide power to the connected

Receiver unit, thus no requirement for a PSU on the Receiver end.

This device can be cascaded up to five times to create additional

zones.

2. APPLICATIONS

• Household entertainment sharing and control

• Lecture room display and control

• Showroom display and control

• Meeting room presentation and control

• Classroom display and control

3. PACKAGE CONTENTS

• CAT5e/6/7 over HDMI & CAT5e/6/7 with IR Splitter

• IR Blaster x 1

• IR Extender x 1

• 24V DC Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

• Source equipment with HDMI over CAT5e/6/7 Transmitter

• Display TV/Monitor with HDMI input connector

• HDMI over CAT5e/6/7 Receivers with industry CAT5e/6/7 cables

1 1