CYP QU-14S Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador CYP QU-14S. CYP QU-14S 10 páginas. 1 to 4 hdmi distribution amplifier
También para CYP QU-14S: Manual de instrucciones (8 páginas), Manual de instrucciones (16 páginas)

Imprimir página
CYP QU-14S Manual de instrucciones

6.2 Rear Panel

SYS
RESET
EDID
SERVICE
ON
OFF
STD
TV
1
2
3
SYS RESET ON/OFF
1
This switch allows the user to perform a system reset. The default
setting is OFF, leave as it is when in normal use. By switching
ON, the unit will perform a reset every 8~10 minutes, in order to
perfrom this function the displays must have CEC supported.
When performed successfully, the system will automatically switch
the displays to HDMI input 1. They system reset will not perform on
those displays that do not have a CEC function.
2
EDID STD/TV
The default factory setting is on TV, leave as it is when the display
is properly. The unit will detect the 1
it obtain a 4Kx2K EDID and send out the signal accordingly to all
other output ports.
st
If the 1
HDMI output is without a 4Kx2K's EDID the unit will detect all
output's EDID and send out the signal that all outputs can accept.
This device obtain the last memory function therefore, the device
will use the last output port 1's EDID when output port 1 is not
connected to a display after every power cycling or switch in
between the EDID setting.
Switch to STD to use build-in EDID if the display has problem. STD
EDID's video at 1080p@60Hz and audio at LPCM 2CH.
3
SERVICE
This slot is reserved for factory service only.
4
HDMI IN
Connect with source equipment such as DVD/Blu-ray or PS3
player.
3
HDMI IN
1
4
HDMI OUT
2
3
5
st
HDMI output's EDID when
4
DC 5V
6