Cypress CY3664-EXT Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Microcontroladores Cypress CY3664-EXT. Cypress CY3664-EXT 2 páginas. Encore iii

1. Unpack the CY3664-EXT enCoRe III kit

contents including application board,

MiniProg1, USB A to mini-B cable,

resistor/wire pack, and power supply

adaptor.

1. Attach a wire from P00 on J5 to S1 on

J2, to activate button S1.

2. Connect the mini-B side of the USB A to

mini-B cable to the application board.

Connect the A side of the cable to the

PC.

3. The board enumerates as a USB mouse

HID device.

CY3664-EXT enCoRe™ III DEVELOPMENT KIT

QUICK START GUIDE

1. Insert the kit CD/DVD into the CD/DVD

drive of your PC.

2. Install the kit contents.

1. On the PC, go to Control Panel >

Mouse > Pointer Options; clear the

'Enhance pointer precision' option.

2. Open a simple drawing application,

such as Paint.

3. The mouse cursor moves in the shape of

the letters U, S, and B. Press the S1

button on the DVK to stop drawing.

4. Press the S1 button on the DVK board to

toggle the start and stop of drawing in

the drawing application.