Cloud VMA240 Instrucciones de seguridad - Página 4
Navegue en línea o descargue pdf Instrucciones de seguridad para Amplificador Cloud VMA240. Cloud VMA240 16 páginas. Mixer-amplifiers
Imprimir página
Safety Information
Safety Notes regarding Installation
•
Do not expose the unit to water or moisture.
•
Do not expose the unit to naked flames.
•
Do not block or restrict any air vent.
•
Do not operate the unit in ambient temperatures above 35°C
•
Do not touch any part or terminal carrying the hazardous live symbol while power is supplied to the unit.
•
Do not perform any internal adjustments unless you are qualified to do so and fully understand the hazards associated with
mains-operated equipment.
•
The unit has no user-serviceable parts. Refer servicing to qualified service personnel.
•
If the moulded plug is cut off the AC power lead for any reason, the discarded plug is a potential hazard and should be
disposed of in a responsible manner.
Conformities
This product conforms to the following European EMC Standards:
EN 55032:2015 - Emissions
EN 55035:2017 - RF Immunity
EN 61000-3-3:2013 - Supply voltage tolerance
EN 61000-3-2:2018 - Harmonics
EN 62368-1:2018 - Electrical safety
Safety Considerations and Information
Cloud VMA Series mixer-amplifiers must be earthed. Ensure that the mains power supply provides an effective earth connection
using a three-wire termination.
Caution – High Voltage
Do not touch any part or terminal carrying the hazardous live symbol
the hazardous live symbol refers require installation by a qualified person.
Caution – Mains Fuse
Mains over-current protection is provided by the user-replaceable fuse in the IEC receptacle. Only replace this fuse with one of
an identical type and rating:
Caution – Servicing
The unit contains no user-serviceable parts. Refer servicing to qualified personnel. Do not perform servicing unless you are
qualified to do so. Disconnect the power cable from the unit before removing the top panel and do not make any internal
adjustments with the unit switched on. Only reassemble the unit using bolts/screws identical to the original parts.
4
VMA Series Installation Guide V1.0
230 V versions
Fuse type
T2AH time-delay
Fuse size
Fuse rating
while power is applied to the unit. Terminals to which
115 V versions
T4AH time-delay
5 mm dia x 20 mm
2 A
4 A