Cypress CY3677 Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Placa base Cypress CY3677. Cypress CY3677 2 páginas.
Imprimir página
• Run the ClockWizard software
• Refer to the Example Projects in the Kit Guide to
evaluate different configurations and for instructions
on programming the device
LDO Jumper
Settings (J13)
USB Mini-B
Connector
Frequency
Select Jumpers
(J14, J15)
Status LED
PSoC 5LP
(CY8C5868LTI-LP039)*
© 2016 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the property of their respective owners.
002-11137 Rev.*B
QUICK START GUIDE
CY3677 EVALUATION KIT
CY3677 Evaluation Board Details
Main Power
OE Control
Supply Jumper (J1)
VCXO Input
(J2)
Table: Jumpers Default Position
Jumper
J1
J2
J5
5
J13
J14
J15
J16
(J16)
Crystal*
Purpose
Power on CY29430
VCXO input set to GND
Termination voltage
set to GND
LDO output set to 3.3V
FS1 set to VDD_DUT
FS0 set to VDD_DUT
OE set to GND
External Clock
Reference (TCXO)
Power LED
Single-Ended
Clock Output
(LVCMOS)
Differential
Clock Output
Termination
Jumper (J5)
CY29430FLQXI
* Components are on the bottom-side
of the Evaluation Board
Default
Position
1 - 2
1 - 2
1 - 2
2 - 3
1 - 2
1 - 2
2 - 3