Cypress CY8CKIT-002 Manual del kit - Página 8

Navegue en línea o descargue pdf Manual del kit para Placa base Cypress CY8CKIT-002. Cypress CY8CKIT-002 16 páginas. Psoc miniprog3 program and debug kit guide

Imprimir página

Figure 2-3. PSoC Programmer: MiniProg3 Selected and Connected

4. To connect to the port, in the Port Selection window, click the MiniProg3 device. You can also

click Connect/Disconnect.

If the connection is successful, the green status LEDs on MiniProg3 light up and a blue dot

appears next to MiniProg3 in the Port Selection box. Also, the indicator in the lower-right corner

of the PSoC Programmer window turns green and shows Connected.

You can now use MiniProg3 and the functions it supports.

For more information on how to use PSoC Programmer, see Help Topics under the Help menu in

PSoC Programmer or press [F1].

2.3

Example Projects

MiniProg3 is supported by PSoC Programmer, a simple GUI that connects to programming

hardware, to program and configure PSoC devices and to develop custom applications.

Example projects and documentation are included in the PSoC Programmer installation and are

available in the PSoC Programmer installation directory:

<Install_Directory>\Programmer\Examples

The PSoC Programmer installation directory also includes documentation on how to use the

programming interface:

<Install_Directory>\Programmer\Documents

CY8CKIT-002 PSoC® MiniProg3 Program and Debug Kit Guide, Doc. # 001-59350 Rev. *I

Installing MiniProg3