Cloud Contractor CVS-P62TW Manual de instalación - Página 3
Navegue en línea o descargue pdf Manual de instalación para Altavoces Cloud Contractor CVS-P62TW. Cloud Contractor CVS-P62TW 6 páginas. Pendant loudspeakers
Imprimir páginaSET UP AND OPERATION
This speaker is designed to hang from the ceiling. A safety cable should be used when installing the speakers to
avoid personal injury and damage to the speaker.
1. Set the speaker to the proper setting for your installation (25/70/100 V/8 ohm)
2. Install the top cover and fasten the provided eye-hook, nut and washer to the top cover and speaker as
illustrated below.
3. At each speaker location, route the speaker cable(s) hanging from the ceiling area through the top cover,
and dress the cables to the wire rope using plastic cable ties. If using a supplied back cover, slide the speaker
cables through the back cover. Strip the ends of the cables approximately 1/8" to 3/16" (3 mm - 5 mm) and if
the wire is stranded twist the strands.
4. Connect the wires from the amplifier (or the previous speaker) to the supplied terminal block, using the
IN terminal; red to + and black to –. Please refer to the following pages for examples of various types of
applications.
Attach the speakers to the safety cable (refer to page 6).
5. If mounting to the wall/ceiling with the mounting bracket, use the appropriate hardware and securely attach
the bracket to the ceiling/wall (refer to page 6).
NOTE: If the speaker is to be installed outdoors, you will need to purchase the optional accessories separately.
CVS-P Series Installation Guide V1.0
3