Ashly ne1600.70 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Ashly ne1600.70. Ashly ne1600.70 12 páginas. Network enabled two channel power amplifiers
También para Ashly ne1600.70: Manual de instrucciones (12 páginas), Manual de instrucciones (16 páginas)

Imprimir página

3) Polarity button - This inverts the phase

of the input channel.

4) Offset link group - Up to 16 groups

are available for the purpose of linking similar

function parameters across multiple channels. In

addition to the control surface secondary level

control (not the main fader), most DSP functions

have a link group check box in their work window

to assign a specific parameter to one of the 16 link

groups. Link groups can be renamed by clicking

on any group name and entering the new name

then pressing <enter> on the keyboard.

5) Attenuators - These two dials indicate the

physical position of hardware controls on either

the amp front panel or on a remote level control.

Note that these will display the current position

of attenuators even when disabled in software.

6) Total Attenuation - This indicates the

total amount of attenuation being applied to the

channel. This is the sum of the following attenu-

ators: main fader, offset link group attenuation,

front panel and remote attenuators.

7) Meters - Input and Output meters display

the real time activity per channel, in dB below

rated output. Also, the amplifier's operating

temperature and output current are shown. Output

current shows that the amplifier channel is actu-

ally delivering output to a connected speaker load.

The DSP Control Tab

Extensive online help information is available for all DSP blocks. Look in the Protea

and Index/Contents/Protea NE Products/NE Amplifiers/DSP Control for details of all DSP functions. The key features include:

1) Input Channel Number - Right click on this to bring up Clear, Copy, Link, and Sub Preset functions for that input channel.

2) Input Channel Name - The user can name each input channel.

3) Input Mute Button - Mutes the input.

4) Pluggable Input DSP Tools - Six boxes are available for custom configuration of pluggable DSP processing blocks.

Available DSP blocks include Dynamics controls, Gain and Remote Gain functions, Graphic and Parametric EQ, Crossover

functions, Delay, Metering, and a Signal Generator.

5) Input/Output Matrix Router - Any input can be routed to any or all outputs. Click and drag from the input to output to

assign routing. To delete a route, right click on the routing line and delete.

6) Output Mixer - For a given amplifier output channel, all inputs that have been routed in the matrix router are mixed

together here.

Operating Manual - NE Two Channel Power Amplifiers

(Image on next page)

Protea

Two-Channel Amplifier Control Surface

Software Help Menu/Contents