Cypress CY8CKIT-025 Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Hardware informático Cypress CY8CKIT-025. Cypress CY8CKIT-025 2 páginas. Precision analog temperature sensor expansion board kit
Imprimir página®
PS
C
PRECISION ANALOG TEMPERATURE SENSOR EXPANSION BOARD KIT
O
3
Board Setup
1. Connect the thermocouple at connector J2.
2. Connect 2N3904 transistors at connector J4 for
diode measurement.
5
Program the PSoC Device
1. Open TempSense_030_050.cywrk from PSoC
Creator Start Page > Examples and Kits > Kits >
PSoC Precision Analog EBK.
Use TempSense_001 for CY8CKIT-001.
2. Select the location for the example project.
3. To use the project with PSoC 5LP, open the Device
Selector from Project menu and select
CY8C5868AXI-LP035.
4. Click the Program icon in PSoC Creator.
5. Press Reset button on board to restart the kit.
For the latest information about this kit, visit
http://www.cypress.com/go/CY8CKIT-025
© 2011-2013 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered
trademarks referenced herein are the properties of their respective owners.
QUICK START GUIDE
4
Connect with PSoC 3/PSoC 5 Development Kit
1. Connect the CY8CKIT-025 Expansion Board Kit to
Port E of the CY8CKIT-030 PSoC 3 Development
Kit/CY8CKIT-050 PSOC 5LP Development Kit.
2. Power the CY8CKIT-030/CY8CKIT-050 by
connecting the USB cable at J1.
6
Test the Expansion Board Kit
1. LCD shows the temperature reading.
2. Use the P5_5 and P5_6 CapSense buttons on
CY8CKIT-030/CY8CKIT-050 to select
temperature display of different sensors.
Note: For CY8CKIT-001, use the P0_5 and
P0_6 CapSense buttons.
3. Refer to the CY8CKIT-025 Kit Guide for
information on kit operation and additional
example projects.
Doc #: 001-65531 Rev. *D