Ashly MQX-2310 Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Equipos de grabación Ashly MQX-2310. Ashly MQX-2310 12 páginas. Graphic equalizer
También para Ashly MQX-2310: Folleto (1 páginas), Manual de instrucciones (16 páginas), Notas técnicas y especificaciones (2 páginas), Manual de instrucciones (13 páginas)

Operator Manual – MQX Series Equalizers

MQX equalizers use "Q" enhanced Wein bridge filters and interleaved summing for constant

"Q", low ripple, and minimum filter interaction. A servo-balanced output stage simulates a

true transformer output to allow interfacing with virtually any type of load.

MQX equalizers have with three different connector types:

1/4" inch stereo phone jacks

Three pin XLR type connectors

Euroblocks

These three connectors facilitate interfacing to most professional audio products. Both

inputs and outputs can be used balanced or unbalanced.

Your MQX series equalizer is provided with three different connector types:

1. 1/4 inch stereo phone jacks (TRS)

2. Three pin XLR type connectors

3. Euroblock Connector

When possible, balanced connections are recommend between all components in your

system, as this eliminates ground-loop induced hum and noise.

Unbalanced Connections and Grounding

If you must use unbalanced connectors, the negative lead of the connector should be tied to

the ground lead. Using unbalanced connections could result in chassis ground-loop noise.

Altering the signal/chassis ground relationship in equipment connected to your MQX unit

may eliminate the noise.

MQX Connector Polarities

Page - 5

Safety Instructions – 3

Introduction - 4

MQX Equalizers – 5

Connectors & Cables – 5

Grounding

Physical Description - 6

Installation – 7

Typical Applications - 8

Troubleshooting - 9

Dimensions - 9

Specifications - 10

Warranty - 11