Ashly Protea NE4250.10 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Hardware informático Ashly Protea NE4250.10. Ashly Protea NE4250.10 16 páginas. Network enabled multi-channel power amplifiers
También para Ashly Protea NE4250.10: Manual de instrucciones (16 páginas), Manual de instrucciones (16 páginas), Hoja de especificaciones (2 páginas), Especificaciones (2 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones (20 páginas)

Operating Manual - NE Multi Channel Power Amplifier

WR-1 Remote Level Control - The WR-1 is a dual potentiometer remote volume control designed to fit in a standard

wall electrical box, and is wired to the amplifier (with or without DSP installed) back panel Euroblock connector labeled "Remote

Level Control" using four conductor wire. If wiring a custom potentiometer assembly other than the WR-1, connect +5V from

the Remote Level Control Euroblock connector to the potentiometer's CW pin, GND to the CCW pin, and the channel under

control to the wiper. Do not connect the WR-1 remote level control ground to any other external grounds.

WR-2 Remote Preset Recall Switches - The WR-2

(shown at right) allows selection of one of four presets via

interlocking pushbutton switches. Each pushbutton switch can

be connected to a Preset Recall Pin on the back panel of the

amplifier. The terminal numbers correspond to the first 4 Preset

Memory locations in the controlled amplifier. Pressing a button

will select the corresponding preset. Windows are provided by

each switch for a user-generated label.

combines one potentiometer for remote level control with a four position rotary switch for preset recall.

WR-1.5 Remote Level Control and Preset Recall Switch - The WR-1.5 (shown at left)