ashtech Z-Xtreme Manual de inicio rápido - Página 5

Navegue en línea o descargue pdf Manual de inicio rápido para GPS ashtech Z-Xtreme. ashtech Z-Xtreme 6 páginas.

Upon completion of entering the numeric ANT HT, the LCD display menu will scroll the

entered ANT HT for confirmation. If you made a mistake entering the ANT HT, simply

depress the ⇓ for 1 second, re-enter the correct ANT HT.

This will advance the LCD display menu to DESIRED VECTOR LENGTH menu...

Bypass this menu by pressing the ⇑ for 1 Second. (Scroll Through Menu).

This will you advance you to the LCD display to STATUS Menu...

The STATUS menu is a Sub-Menu that displays the current Position, PDOP, Satellites

Used, and Time.

To gain entry to the STATUS Sub-Menu, press the ⇓ for 3 seconds

(Move to Lower Menu).

This is a READ-ONLY Menu, the User CAN-NOT input any information in this Menu.

It is for status / monitoring purposes ONLY.

Use the ⇑ for 1 Second. (Scroll Through Menu) to view the current Latitude, Longitude,

Ellipsoid Ht, PDOP and Time. This data can be written onto the Observation Log.

Press the ⇑ for 3 Seconds, this will return you to the STATUS menu, Press the ⇑for 3

seconds again, this will return you to the SURVEY: STATIC menu.

This returns you to the MAIN MENU...

Scroll through the MAIN MENU by pressing the ⇑ for 1 Second, this will navigate you

back through the SYS INFO, SURVEY: STATIC, SURVCONF, SESSION,

SETTINGS menus.

Enter the REC INT...

From the SURVEY:STATIC menu, press the ⇑, for 1 Second, navigate the menu to

SURVCONF...

At the SURVCONF menu, press the ⇓ for 3 seconds

(Move to Lower Menu). This will move you into the REC INT: 015s menu.

The REC INT: 015s may have been pre-programmed in to the receiver memory.

If this is the case, verify the REC INT is correct per the GPS Project instructions.

If the REC INT is correct, simply bypass this menu by pressing the ⇑ for 1 second.

Thales Navigation: ZX-Static Operations