Cypress Semiconductor CY7C1353G Hoja de especificaciones - Página 12

Navegue en línea o descargue pdf Hoja de especificaciones para Hardware informático Cypress Semiconductor CY7C1353G. Cypress Semiconductor CY7C1353G 14 páginas. Cypress 4-mbit (256k x 18) flow-through sram with nobl architecture specification sheet

Imprimir página

Ordering Information

Not all of the speed, package and temperature ranges are available. Please contact your local sales representative or
visit
www.cypress.com
for actual products offered.
Speed
(MHz)
Ordering Code
133
CY7C1353G-133AXC
CY7C1353G-133AXI
100
CY7C1353G-100AXC
CY7C1353G-100AXI

Package Diagrams

R 0.08 MIN.
0.20 MAX.
0.25
GAUGE PLANE
0°-7°
0.60±0.15
1.00 REF.
ZBT is a trademark of Integrated Device Technology, Inc. NoBL and No Bus Latency are trademarks of Cypress Semiconductor.
All product and company names mentioned in this document are the trademarks of their respective holders.
Document #: 38-05515 Rev. *E
© Cypress Semiconductor Corporation, 2004-2007. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for
the use of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended
to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize
its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Package
Diagram
51-85050 100-Pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Pb-Free
51-85050 100-Pin Thin Quad Flat Pack (14 x 20 x 1.4 mm) Pb-Free
100-Pin TQFP (14 x 20 x 1.4 mm) (51-85050)
16.00±0.20
14.00±0.10
100
81
1
80
30
51
31
50
0° MIN.
STAND-OFF
0.05 MIN.
0.15 MAX.
R 0.08 MIN.
0.20 MAX.
0.20 MIN.
A
DETAIL
Part and Package Type
0.30±0.08
0.65
TYP.
SEATING PLANE
NOTE:
1. JEDEC STD REF MS-026
2. BODY LENGTH DIMENSION DOES NOT INCLUDE MOLD PROTRUSION/END FLASH
MOLD PROTRUSION/END FLASH SHALL NOT EXCEED 0.0098 in (0.25 mm) PER SIDE
BODY LENGTH DIMENSIONS ARE MAX PLASTIC BODY SIZE INCLUDING MOLD MISMATCH
3. DIMENSIONS IN MILLIMETERS
CY7C1353G
Operating
Range
Commercial
lndustrial
Commercial
lndustrial
1.40±0.05
12°±1°
SEE DETAIL
(8X)
0.20 MAX.
1.60 MAX.
51-85050-*B
Page 12 of 13
A
[+] Feedback